Skip to content
3D Design Studios

Shop drawings

Building envelope and rainscreen shop drawings

Your cladding package has to get through the design team and the envelope consultant before anything is released. We draft the full wall assembly: the cladding layout on every elevation, the rainscreen cavity, the exterior insulation and the clips or girts behind it, the sheathing membrane, and the flashing and sealant details at every opening and floor line. Drafting only, at a fixed price per building.

Price
Fixed price, quoted within one business day
Turnaround
Agreed per building and issued in packages
Cladding shop drawing with panel sizes, joint lines and trim details on a building elevation

The whole wall, drawn for review

On mid-rise rental housing, condos and commercial buildings, the cladding trade has to submit shop drawings for the full wall assembly before materials are released. The design team and the building envelope consultant check that the cladding, the exterior insulation, the sheathing membrane and the flashings work together at every floor line, opening and edge. We draft that set for you, from the design team's CAD or Revit files and the specification sections for your package.

Rainscreen walls, Canadian climate

Coastal British Columbia and many other parts of Canada build cladding as a rainscreen: a drained and vented cavity behind the face, over strapping or a clip system. Our details show the cavity depth, the strapping or clip and girt layout, the insect screens and the drainage path at the base of the wall and above every opening, so the water that gets behind the cladding has a clear way out.

Energy codes keep pushing exterior insulation thicker. That makes the clip or girt system, and the thermal bridging through it, part of the drawings: we draw the layout from the system supplier's data, and the design of it stays with their engineer.

Specification sections we draft for

  • 07 21 00 Thermal insulation: exterior insulation and its attachment layout
  • 07 25 00 Weather barriers: the sheathing membrane and its laps
  • 07 27 00 Air barriers: transitions at windows, floor lines and penetrations
  • 07 42 13 Metal wall panels
  • 07 42 43 Composite wall panels (ACM and MCM)
  • 07 46 16 Aluminum siding and soffits
  • 07 46 23 Wood and engineered wood siding
  • 07 46 46 Fibre cement siding and panels
  • 07 62 00 Sheet metal flashing and trim
  • 07 92 00 Joint sealants

The same numbers as your specification

The National Master Specification (NMS) and most Canadian project specifications follow the MasterFormat numbering, so the cladding, insulation, membranes and flashing all sit in Division 07. We title and reference each sheet to the sections in your package, which makes the submittal easier to log and review.

What the set includes

  • Cover sheet, general notes, product list and key plans
  • Cladding layout on every elevation: joints, reveals, trims and openings, dimensioned
  • Wall sections through each typical assembly, with the rainscreen cavity and the exterior insulation
  • Typical details: window head, sill and jamb, inside and outside corners, base of wall, floor-line joints, parapet, soffit, balcony and penetrations
  • Special details where the design goes beyond the typical set
  • Strapping, clip and girt layouts from the system supplier's data

Drafting only: seals stay with a P.Eng.

We do not design attachments or seal drawings. Clip, girt and fastener design, wind-load calculations and any sealed drawings stay with a professional engineer licensed in your province, usually the system supplier's engineer or the project's structural engineer. We draw to their requirements and revise the set to their comments.

Issued in packages, so review starts early

On a larger project we issue the drawings by building, or by groups of elevations. The typical detail book goes first, because every elevation refers to it, so the consultant can start reviewing while we finish the rest. Markups come back to us and go out again as a numbered revision.

Know-how from a cladding manufacturer

The team is led by a founder who was a technical manager at James Hardie for more than 17 years and wrote its ExoTec facade manual. Fibre cement and panel systems are home ground: joints go where the system allows them, flashings lap the right way and fastener zones come from the manufacturer's data.

Questions we are asked

What are building envelope shop drawings?

They are the cladding trade's drawings of the wall assembly as it will be built: the cladding layout on every elevation, plus the exterior insulation, the sheathing membrane, the rainscreen cavity and the flashing and sealant details at each opening and transition. The design team and the building envelope consultant review them before materials are released.

What is the difference between shop drawings and submittals?

Shop drawings are one part of a submittal. For a Division 07 package the submittal usually also holds the product data sheets, samples, test reports and warranty information the specification asks for. We prepare the shop drawings; the product data and samples come from you and the manufacturer.

Who prepares shop drawings, the contractor or the design team?

The contractor or trade responsible for the work prepares them, often through a drafting firm like ours, and the design team and the building envelope consultant review them. The design drawings show what is to be built; the shop drawings show exactly how your crew will build it.

Do you draw rainscreen walls?

Yes. We draw the cladding over strapping or a clip and girt system, the drained cavity behind it, and the flashings that lead water out at the base of the wall and above every opening.

Do you provide sealed or engineered drawings?

No. We draft. Attachment design, calculations and seals stay with a P.Eng. licensed in your province, and we coordinate the set with them.

Can you work from PDFs if we do not have CAD files?

Yes. CAD or Revit files make it faster, but we can draw from PDF elevations and sections.

Can we send you every project?

Yes. You can use us as your drafting department: we keep your title block, standard details and drawing conventions, so each package starts from what your reviewers have already accepted.

How fast do we get a price?

Send the drawings, the specification sections and your scope, and we usually come back with a fixed price within one business day.